Do you really need to learn how to read an OS map when your phone has GPS? Yes, because batteries die, signal vanishes in valleys, and a paper map never needs charging. The good news is that the basics take an afternoon to learn, and most of what puts people off is myth.
Here are the common beliefs I hear about Ordnance Survey maps, one at a time, with what is actually true.
Myth one: you need to be an expert to read an OS map
You don’t. An OS map is a drawing of the ground seen from above, with a key down the side explaining every mark. If you can follow a London Underground diagram, you can follow a footpath on an Explorer map. Start by walking a route you already know, with the map in your hand, and spot the things you can see around you: a church, a stream, a gate.

Myth two: all OS maps are the same
They are not, and scale is the difference. Ordnance Survey publishes two popular walking series. The Explorer series is 1:25,000, meaning 4 centimetres on the map is 1 kilometre on the ground. The Landranger series is 1:50,000, where 2 centimetres equals 1 kilometre.
For walking, I’d choose Explorer (orange cover) every time. It shows field boundaries, footpaths and bridleways in fine detail. Landranger (pink cover) suits driving and planning wider areas, but it is less helpful when you are standing at a stile wondering which way to go.
Myth three: contour lines are too confusing to bother with
Contour lines are simply lines joining points of equal height. On Explorer maps they are usually drawn at 5 metre intervals, and every fifth line is thicker and carries a height number. The map legend confirms the interval for your sheet.
Two rules do most of the work:
- Lines close together mean a steep slope. Lines far apart mean gentle ground.
- Rings of contours mean a hill or a hollow. The numbers tell you which: they rise towards a summit.
Before a walk, trace your route with a finger and count how many lines you cross. That tells you how much climbing to expect, which is far more useful than the distance alone.
Myth four: grid references are just for the military
A grid reference is simply a way of naming a spot, and it is handy if you ever need to tell someone, including the emergency services, exactly where you are. The blue grid lines on the map form squares, each one kilometre across, with numbers along the edges.
To give a six-figure reference, follow this routine:
- Read along the bottom edge to the line left of your spot (the eastings), then estimate tenths of the way across the square.
- Read up the side to the line below your spot (the northings), then estimate tenths up the square.
- Write the eastings first, then the northings. The saying is "along the corridor, then up the stairs".
That gives you six digits, which pins you down to within about 100 metres. If you are ever in trouble, the Mountain Rescue England and Wales advice is to call 999 and ask for the police, then mountain rescue, so being able to say where you are matters.
Myth five: the symbols are impossible to memorise
You don’t need to memorise them. The key is printed on every Explorer map, and you will pick up the common ones quickly. Green dashes mark public footpaths, longer green dashes mark bridleways, and red dashes mark byways open to all traffic. Blue is water, black dots show boundaries and walls, and little blue tents or cups of tea (yes, really) mark campsites and tea rooms.

Rights of way matter, because they tell you where you may legally walk. Open access land is shown with a yellow tint and an orange border on current Explorer maps, and it lets you roam freely in England and Wales. Rules differ in Scotland, where the Scottish Outdoor Access Code applies.
Myth six: a phone app makes a paper map pointless
Apps are brilliant, and I’d happily use one alongside a map. But cold drains batteries quickly, and a cracked screen in the rain is no use to anyone. A paper map shows you the whole landscape at once, so you can see the shortcut, the escape route and the pub.
If you need somewhere to put together your own walking notes or route blog, a reliable host such as dijiHost can keep your pages online without fuss, though the map itself needs nothing but you and a pair of boots.
How do you set a map and take it outdoors?
To set a map, turn it until the features on the page match the features in front of you. You don’t need a compass for this on a clear day: if the river is on your left on the map, turn until it is on your left in real life. Fold the map so your route shows, and keep it in a clear case or a zip bag in the autumn drizzle.
A compass adds precision, and a basic baseplate compass is cheap. The main point is that north on the map points to grid north, and the difference from magnetic north is shown in the legend. Learn that only once the basics feel comfortable.
A sensible first practice walk
Pick a short loop of three or four miles near home, ideally on rights of way you can identify. Before you set off, note three landmarks on the map, such as a bridge, a farm and a woodland edge. Tick each off as you pass it. If you want to take things up a level afterwards, our guide to fell walking for absolute beginners in the Lake District is a good next step.
Do this two or three times and the map will stop feeling like a puzzle. Take your phone as a back-up, keep it in your pocket, and see how far the paper gets you. The Ordnance Survey’s own website, Ordnance Survey, has free guides and a map shop for choosing your first Explorer sheet.





Leave a Reply